HistoCore AUTOCUT R - Automated Rotary Microtome for Research
149AUTOR0C1, 14052358241
New Worlds Discovered - Research Reimagined
Produce High Quality Sections from Non-Human Paraffin to Resin Embedded to Thin Sectioning with our Special Accessories
Does your Microtome allow you to conduct a wide range of research? The HistoCore AUTOCUT R gives you the flexibility to produce sections across multiple research applications. Whether you are researching paraffin or cutting resin-embedded bones or thin-sections down to 0.5 microns, you can easily select the blade and specimen holder to meet your needs and broaden your research horizons with every cut.
- Every research microtomist can use their preferred sectioning mode:
- Automated: motorized push-button sectioning at a consistent speed frees your hands to prepare sections.
- Manual: full control at the speed you need.
- Maximize safety in the lab: HistoCore AUTOCUT R features a new enhanced model with an automatic electronic brake to minimize the risk of hand injury when changing the block
Specs
Product Specifications
General
| Type: | Motorized |
| Nominal Supply Voltage: | 100 / 120 / 230 / 240 V AC |
| Nominal Frequency: | 50/60 Hz |
| Maximum Power Consumption: | 100 VA |
| Protection Class: | I |
| Power Fuses: | 2 x T 3.15 AL, 250V |
| Pollution Degree: | 2 |
| Overvoltage Category: | II |
| Maximum Heat Emission: | 340 J/s |
| Operating Temperature Range: | +18°C to +30°C |
| Temperature Range During Storage: | +5°C to +50°C |
| Relative Humidity During Operation: | 20% to Max. 80% Non-Condensing |
| Relative Humidity During Storage: | 10% to Max. 85% Non-Condensing |
Dimensions & Weight
| BASIC INSTRUMENT | |
|---|---|
| Width (including handwheel and coarse feed wheel): | 477 mm |
| Depth (including waste tray): | 620 mm |
| Height (without top tray): | 295 mm |
| Weight (without accessories): | Approx. 40 kg |
| CONTROL PANEL | |
|---|---|
| Type: | Separate control panel & in-housing integrated instrument control panel |
| Width: | 119 mm |
| Depth: | 193 mm |
| Height: | 50 mm |
| Height (in inclined position): | 81 mm |
| Weight (net): | 0.6 kg |
Microtome Performance Specs
| Specimen Feed: | approx. 24 mm ±1 mm |
| Vertical Stroke: | 70 mm ±1 mm |
| Large Standard Clamp: 55 x 50 x 30 mm Super Cassette Clamp: 68 x 48 x 15 mm | |
| Motorized Sectioning Speeds: | 0 - 420 mm/s ±10% |
| SPECIMEN RETRACTION | |
|---|---|
| In Manual Sectioning Mode: | 5 - 100 µm (in 5 µm increments); can be turned off |
| In Motorized Sectioning Mode: | Speed-Dependent; can be turned off |
| SPECIMEN ORIENTATION | |
|---|---|
| Horizontal: | ± 8° |
| Vertical: | ± 8° |
| SECTION THICKNESS SETTINGS | |
|---|---|
| Range: | 0.5 - 100 µm |
| Setting Values: | 0.5 - 5 µm (in 0.5 µm increments) |
| 5 - 20 µm (in 1 µm increments) | |
| 20 - 60 µm (in 5 µm increments) | |
| 60 - 100 µm (in 10 µm increments) |
| TRIMMING SECTION THICKNESS SETTINGS: | |
|---|---|
| Range: | 1 - 600 µm |
| Setting Values: | 1 - 10 µm (in 1 µm increments) |
| 10 - 20 µm (in 2 µm increments) | |
| 20 - 50 µm (in 5 µm increments) | |
| 50 - 100 µm (in 10 µm increments) | |
| 100 - 600 µm (in 50 µm increments) |
Additional Specifications
| Handwheel Balance System: | |
| Handwheel Lock / Brake: | 2 Mechanical Locks, 1 Electronic Brake |
| Safety Hand Wheel: | Handle can be Centered |
| Coarse Feed Wheel Turn Direction: | Clockwise or Counter-Clockwise |
| WASTE TRAY | |
|---|---|
| Type | Standard |
| Waste Tray Volume | 1400 ml |
| SELECTABLE CUTTING MODES | |
|---|---|
| Rock Mode: | - with activated retraction |
| Single Mode: | |
| Continuous Mode: | |
| Step Mode: | |
| Program Mode: |
| BLADE HOLDER | |
|---|---|
| Type: | 2-in 1 for high and low profile blades |
| North-South Movement: | ± 24 mm |
| East-West Movement: | 3 Positions |
| Lateral Displacement Function: | via knife holder CE clamping top |
| SPECIAL FEATURES | |
|---|---|
| Remaining Feed Indicator | Visual and Acoustical |
| Section Counter | |
| Section Thickness Totalizer | |
| Memory Position | |
| Special Spindle for Precise Semi-Thin Sectioning | |
| Expanded Slow Speed Adjustment for Precise Semi-Thin Sectioning | |
| Precise 3D Object Head Stop Position |
Features
Product Features
Prepare High Quality Non-Human Paraffin Sections for all of your Research Needs
The microtome is specially designed for serial cutting with the actively cooled RM CoolClamp and the low-temperature block for consistent slice thickness over multiple sections. Switch between high and low-profile blades even faster without changing blade holders by using the 2-in-1 Blade Holder.
Apply the Tungsten Carbide Blade and Knife for Consistent Resin-Embedded Sectioning
Depending on your needs, choose either the TC-65 disposable tungsten carbide blade for applications as thin as 2 microns or the reusable tungsten carbide knife for slices as thin as 1 micron.
Directional Fixture for Specimen Clamps
Turn the specimen 360° to find the ideal position to reduce the cutting forces.
Precision Orientation System
Always get back to the 0-position on the microtome. The precisionorientation system allows you to precisely position your specimen prior to sectioning.
Force Balance System
The unique force balance system handles various block sizes as well as the RM CoolClamp, which minimizes the risk of injury from an unbalanced object head.
Compare
Quick Compare Chart
Product |
HistoCore BIOCUT R |
 HistoCore MULTICUT R |
HistoCore AUTOCUT R Currently viewing |
 HistoCore NANOCUT R |
| Type | Mechanical | Semi-Motorized | Motorized | Motorized |
| Precision-Orientation System | ||||
| Force Balance System | ||||
| 2-in-1 Blade Holder | ||||
| Specimen Cooling Option with RM CoolClamp | ||||
| Standard Waste Tray | ||||
| Silent Retraction | ||||
| Personalized Coarse Feed Wheel | ||||
| Fast Homing | ||||
| Memory Position | ||||
| Electronic Brake | ||||
| Special Spindle for Precise Semi-Thin Sectioning | ||||
| Expanded Slow Speed Adjustment for Precise Semi-Thin Sectioning | ||||
| Precise 3D Object Head Stop Position |
Documents
Documents
Brochure
Certificates
| EU Declaration HistoCore AUTOCUT R B en | (PDF) |
IFUs
Resources
Resources
Product Feature Demo Videos
Force Balance System
Electronic Brake
Frequently Asked Questions
HistoCore Microtomes
Does the new HistoCore RM antistatic tray fit on the older RM22xx series?
No – the microtome base plates of both series have different dimensions and are not compatible with each other.
How does the new antistatic waste tray reduce contamination?
The antistatic waste tray is made from resistant antistatic material to avoid debris sticking to the walls of the tray.
Is the new 2-in-1 blade holder compatible as a whole assembly with the older RM22xx series?
Yes – only in the combination blade holder and 2-in-1 blade holder.
Can we still use the backlighting with the new blade holder base for the 2-in-1 blade holder?
No – the 2-in-1 blade holder base does not have the cut-out for the backlighting.
Which accessories of the older RM22xx Series cannot be used with the HistoCore RMs anymore?
- Small section waste tray
- Large section waste tray
- Top tray – HistoCore RM top tray is 40% larger than the RM22xx series tray
- Cooling Device – too small to be placed on instrument top. However, it’s still good to place next to the instrument
What is the advantage of the personalized coarse feed wheel?
Convenience and ease-of-user – users can select their personal preference of coarse feed wheel turn direction. This feature is preserved from the RM22xx series, allowing users to trim at the high pace.
What is the advantage of “Fast homing”?
The return speed of the object head from front to home position has been reduced from 26 seconds (older series) to 13 seconds (new series). This accelerated speed helps to shorten the sectioning process each time the object head is returned to home position.
What is the advantage of the Memory Position?
When batch trimming and using the same height of blocks, Memory Position will help to accelerate the sectioning.
- First insert a new block
- Bring the block to the blade
- Set the Memo position (stored)
- Trim
- Remove block for re-cooling
- Press “Memo” – the object head returns to the set object change position
- Insert a new block – check position
- Trim again
Configurations
Configurations
Choose your option below, and then use the Contact Us link above to submit a quote request for your selection
Configuration 1 (149AUTOR0C1)
- Rotary microtome with Automated, Semi-Automated, and Manual Modes
- Automatic Electronic Brake
- Includes Standard Section Waste Tray
- Top Tray
- Precision orientation with quick clamping system for specimen clamps
- Universal cassette clamp
- Two-in-one blade holder E for high and low-profile blades with lateral displacement function (includes blade holder base)
Basic Instrument (14052358241)
- Rotary microtome with Automated, Semi-Automated, and Manual Modes
- Automatic Electronic Brake
- Includes Standard Section Waste Tray
- Top Tray
- Completely customizable with a wide selection of accessories
